If your fleet transports fuel in interstate commerce, the FMCSA HOS waiver allows qualifying drivers to exceed their usual driving limits. But to use that relief, your shipment, carrier, and driver must meet the waiver’s conditions. And, importantly, the waiver expires December 16, 2026.

 

Key Takeaways

  • Check each shipment’s eligibility before using the waiver.
  • Keep waiver copies and participation records accessible, and assign responsibility for crash reporting.
  • Prepare for expiration and check official notices. 

Glossary of Key Terms

  • Hours of service, or HOS: Federal rules that limit how long certain commercial drivers may drive and remain on duty before they must take required rest.
  • Interstate commerce: Transportation connected to trade between states or with another country.
  • Sleeper berth: A truck’s designated sleeping compartment.
  • Compartmentalized load: A shipment carried in separate compartments within one cargo tank.
  • Out-of-service order: An order that temporarily prevents a driver or vehicle from operating because of an identified safety or qualification issue.

 

What Is the FMCSA HOS Waiver for Fuel Haulers? 

Normally, the below limits apply for certain drivers and carriers who transport fuel interstate:  

Data table
Rule Normal requirement
10 hours off duty Drivers must take at least 10 consecutive hours off duty before driving at the start of a work shift.
11-hour driving limit Drivers may drive up to 11 total hours within the permitted driving window.
14-hour driving window Drivers cannot drive after the 14th consecutive hour following the start of duty.
30-minute break Drivers must interrupt driving for at least 30 consecutive minutes before exceeding eight cumulative driving hours without a qualifying interruption. The break can include on-duty time without driving.
60/70-hour limits Drivers cannot drive after accumulating 60 on-duty hours in seven consecutive days if their carrier does not operate every day, or 70 hours in eight consecutive days if it does.

However, the waiver relaxed some of these limitations, beginning on September 16, 2026. 

 

Why FMCSA Issued and Amended the Waiver

In their initial announcement, FMCSA pointed to supply disruptions that could delay gasoline and diesel deliveries as the impetus for the waiver. The agency issued the relief to support anticipated increased demand for fuel in the transportation and agricultural industries.

On October 15, FMCSA added ethanol, denatured ethanol, and limited amounts of heating oil as qualifying loads for the waiver.  

 

Who Qualifies for the Waiver?

The waiver covers qualifying interstate shipments of gasoline, diesel, ethanol, and denatured ethanol (with heating oil qualifying if it's transported in a compartmentalized load with at least one of the four other fuels, provided heating oil does not exceed 75% of the total shipment at loading).  

Some important exceptions apply: For instance, propane and jet fuel fall outside this waiver’s coverage. Additionally, carriers with conditional safety ratings cannot use the waiver, nor can carriers with active out-of-service orders.

 

What Flexibility and Safety Conditions Apply? 

 

Drivers must hold a valid commercial driver’s license (CDL), have all necessary endorsements, and retain valid driving privileges to be eligible for the waiver's exceptions. Plus, they can use the additional driving time only while meeting these safety conditions: 

Data table
Condition Requirement while using the waiver
Driving time No more than 16 total driving hours in any 24-hour period, including driving under other exceptions, waivers, exemptions, or declarations.
Truck with a sleeper berth At least six consecutive hours in the sleeper berth during each 24-hour period.
Truck without a sleeper berth At least eight consecutive hours off duty during each 24-hour period.

 

Records, Driver Rest, and Reporting

Drivers must carry a physical or digital copy of the waiver and present it to law enforcement on request.  

Carriers must also fulfill these requirements:

  • Reporting qualifying crashes within two business days.  
  • Tracking driver participation.  
  • Continuing other required compliance activities (such as drug and alcohol testing, CDL requirements, insurance, and hazardous materials rules).

 

What Happens When the Waiver Expires? 

 

The waiver will expire at 11:59 p.m. on December 16 (unless FMCSA issues further relief), with a transition condition that applies when a driver returns to normal operations: The driver must take a 10-hour break if their time spent in waiver operations, or in combined waiver and normal operations, equaled or exceeded 14 hours.

 

Employer Checklist Before December 16

Prepare your drivers and dispatchers before the final week:

  • Check eligibility. Review your drivers’ fuel types, mixed loads where relevant, carrier status, and driver qualifications.  
  • Brief every shift. Explain the amended waiver, fatigue reporting, empty returns, and the transition to normal operations.
  • Check waiver copies. Ask drivers to locate their physical or digital copy before departure.
  • Prepare for reporting. Keep participation records current and give the person handling crash notices access to the required information.
  • Adjust delivery plans. Review routes, staffing, delivery commitments, and overnight stops using the limits that will apply after the waiver ends.

 

How DISA Can Help

DISA helps your team manage driver qualification files, motor vehicle records, drug and alcohol testing, and fleet reporting, to support the compliance work that continues while you manage temporary HOS relief and prepare for its expiration.

Explore DISA’s DOT transportation compliance services to discuss help with your fleet’s driver records, testing, and reporting needs.

 

Frequently Asked Questions 

The waiver temporarily relaxes normal driving-hour limits for qualifying interstate fuel transportation. Your carrier, drivers, and shipments must meet the waiver’s conditions before you can use the additional hours. 

The scheduled expiration is December 16, 2026, at 11:59 p.m. 

It permits up to 16 driving hours in any 24-hour period. During each 24-hour period, drivers must take at least six consecutive hours in a sleeper berth or eight consecutive hours off duty if the truck has no sleeper berth. If a driver requests immediate rest, you must allow at least 10 consecutive hours off duty before they resume driving. 

Qualifying interstate shipments of gasoline, diesel, ethanol, and denatured ethanol are covered. Heating oil qualifies only in a compartmentalized load with at least one of those fuels and cannot exceed 75% of the total shipment’s volume at loading. 

The normal rules applicable to your operation resume. Check the driver’s duty history and the waiver’s transition-break requirement before assigning normal work. 

DISA Global Solutions aims to provide accurate and informative content for educational purposes only and does not constitute legal advice. The reader retains full responsibility for the use of the information contained herein. Always consult with a professional or legal expert.

circular-pattern dots
Lanson Hoopai

Lanson Hoopai

Content Analyst II

DISA Global Solutions

Lanson Hoopai brings almost a decade of writing and editing experience to the Content Analyst II role at DISA Global Solutions.

Chris Eichenberg

Chris Eichenberg

Vice President of Transportation Sales

DISA Global Solutions

Chris Eichenberg is the Vice President of Transportation Sales at DISA Global Solutions, Inc., where he plays a critical role in advancing the company's position as a leader in safety and compliance solutions for the transportation industry.

Steven Spencer

Steven Spencer

General Manager of Transportation

DISA Global Solutions

Steven Spencer is an accomplished executive and visionary leader, currently serving as the General Manager of Transportation at DISA Global Solutions.

 

Ray Proctor

Ray Proctor

Vice President of Operations for Transportation Compliance

DISA Global Solutions

Ray Proctor is the Vice President of Operations for Transportation Compliance at DISA Global Solutions, where he utilizes his knowledge and experience in FMCSA DOT compliance, transportation management, and logistics to spearhead operational improvements and regulatory adherence.